# SINGULARITY.CONF
# This is the global configuration file for Singularity. This file controls
# what the container is allowed to do on a particular host, and as a result
# this file must be owned by root.


# ALLOW SETUID: [BOOL]
# DEFAULT: yes
# Should we allow users to utilize the setuid program flow within Singularity?
# note1: This is the default mode, and to utilize all features, this option
# will need to be enabled.
# note2: If this option is disabled, it will rely on the user namespace
# exclusively which has not been integrated equally between the different
# Linux distributions.
allow setuid = yes


# MAX LOOP DEVICES: [INT]
# DEFAULT: 256
# Set the maximum number of loop devices that Singularity should ever attempt
# to utilize.
max loop devices = 200


# CONFIG PASSWD: [BOOL]
# DEFAULT: yes
# If /etc/passwd exists within the container, this will automatically append
# an entry for the calling user.
config passwd = yes


# CONFIG GROUP: [BOOL]
# DEFAULT: yes
# If /etc/group exists within the container, this will automatically append
# group entries for the calling user.
config group = yes


# CONFIG RESOLV_CONF: [BOOL]
# DEFAULT: yes
# If there is a bind point within the container, use the host's
# /etc/resolv.conf.
config resolv_conf = yes


# MOUNT PROC: [BOOL]
# DEFAULT: yes
# Should we automatically bind mount /proc within the container?
mount proc = yes


# MOUNT SYS: [BOOL]
# DEFAULT: yes
# Should we automatically bind mount /sys within the container?
mount sys = yes


# MOUNT DEV: [yes/no/minimal]
# DEFAULT: yes
# Should we automatically bind mount /dev within the container? If 'minimal'
# is chosen, then only 'null', 'zero', 'random', 'urandom', and 'shm' will
# be included (the same effect as the --contain options)
mount dev = yes


# MOUNT DEVPTS: [BOOL]
# DEFAULT: yes
# Should we mount a new instance of devpts if there is a 'minimal'
# /dev, or -C is passed?  Note, this requires that your kernel was
# configured with CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, or that you're
# running kernel 4.7 or newer.
mount devpts = yes


# MOUNT HOME: [BOOL]
# DEFAULT: yes
# Should we automatically determine the calling user's home directory and
# attempt to mount it's base path into the container? If the --contain option
# is used, the home directory will be created within the session directory or
# can be overridden with the SINGULARITY_HOME or SINGULARITY_WORKDIR
# environment variables (or their corresponding command line options).
mount home = yes


# MOUNT TMP: [BOOL]
# DEFAULT: yes
# Should we automatically bind mount /tmp and /var/tmp into the container? If
# the --contain option is used, both tmp locations will be created in the
# session directory or can be specified via the  SINGULARITY_WORKDIR
# environment variable (or the --workingdir command line option).
mount tmp = yes


# MOUNT HOSTFS: [BOOL]
# DEFAULT: no
# Probe for all mounted file systems that are mounted on the host, and bind
# those into the container?
mount hostfs = no


# BIND PATH: [STRING]
# DEFAULT: Undefined
# Define a list of files/directories that should be made available from within
# the container. The file or directory must exist within the container on
# which to attach to. you can specify a different source and destination
# path (respectively) with a colon; otherwise source and dest are the same.
#bind path = /etc/singularity/default-nsswitch.conf:/etc/nsswitch.conf
#bind path = /opt
#bind path = /scratch
bind path = /etc/localtime
bind path = /etc/hosts


# USER BIND CONTROL: [BOOL]
# DEFAULT: yes
# Allow users to influence and/or define bind points at runtime? This will allow
# users to specify bind points, scratch and tmp locations. (note: User bind
# control is only allowed if the host also supports PR_SET_NO_NEW_PRIVS)
user bind control = yes


# ENABLE OVERLAY: [yes/no/try]
# DEFAULT: try
# Enabling this option will make it possible to specify bind paths to locations
# that do not currently exist within the container.  If 'try' is chosen,
# overlayfs will be tried but if it is unavailable it will be silently ignored.
enable overlay = try


# MOUNT SLAVE: [BOOL]
# DEFAULT: yes
# Should we automatically propagate file-system changes from the host?
# This should be set to 'yes' when autofs mounts in the system should
# show up in the container.
mount slave = yes


# SESSIONDIR MAXSIZE: [STRING]
# DEFAULT: 64
# This specifies how large the default tmpfs sessiondir should be (in MB).
# The sessiondir is used to hold data written to isolated directories when
# running with --contain, ephemeral changes when running with --writable-tmpfs,
# and the equivalent data in --oci mode.
sessiondir max size = 64


# LIMIT CONTAINER OWNERS: [STRING]
# DEFAULT: NULL
# Only allow containers to be used that are owned by a given user. If this
# configuration is undefined (commented or set to NULL), all containers are
# allowed to be used. This feature only applies when Singularity is running in
# SUID mode and the user is non-root.
#limit container owners = gmk, singularity, nobody


# LIMIT CONTAINER GROUPS: [STRING]
# DEFAULT: @LIMIT_CONTAINER_GROUPS_DEFAULT@
# Only allow containers to be used that are owned by a given group. If this
# configuration is undefined (commented or set to NULL), all containers are
# allowed to be used. This feature only applies when Singularity is running in
# SUID mode and the user is non-root.
#limit container groups = group1, singularity, nobody


# LIMIT CONTAINER PATHS: [STRING]
# DEFAULT: NULL
# Only allow containers to be used that are located within an allowed path
# prefix. If this configuration is undefined (commented or set to NULL),
# containers will be allowed to run from anywhere on the file system. This
# feature only applies when Singularity is running in SUID mode and the user is
# non-root.
#limit container paths = /scratch, /tmp, /global


# ALLOW CONTAINER ${TYPE}: [BOOL]
# DEFAULT: yes
# This feature limits what kind of containers that Singularity will allow
# users to use (note this does not apply for root).
allow container squashfs = yes
allow container extfs = yes
allow container dir = yes


# ALWAYS USE NV ${TYPE}: [BOOL]
# DEFAULT: no
# This feature allows an administrator to determine that every action command
# should be executed implicitly with the --nv option (useful for GPU only 
# environments). 
always use nv = no


# ROOT DEFAULT CAPABILITIES: [full/file/no]
# DEFAULT: full
# Define default root capability set kept during runtime.
# Applies to the singularity runtime only, not --oci mode.
# - full: keep all capabilities (same as --keep-privs)
# - file: keep capabilities configured for root in
#         ${prefix}/etc/singularity/capability.json
# - no: no capabilities (same as --no-privs)
root default capabilities = full


# MEMORY FS TYPE: [tmpfs/ramfs]
# DEFAULT: tmpfs
# This feature allow to choose temporary filesystem type used by Singularity.
# Cray CLE 5 and 6 up to CLE 6.0.UP05 there is an issue (kernel panic) when Singularity
# use tmpfs, so on affected version it's recommended to set this value to ramfs to avoid
# kernel panic
memory fs type = tmpfs
